Dornbracht - Bathrooms - Rain Sky M Rain Panel For Ceiling Installation

Rain Sky M Rain Panel For Ceiling Installation

Manual control
Head spray 200 x 160 mm, 99 nozzles
Body spray 360 x 280 mm, 142 nozzles
Rain curtain 720 x 520 mm, 124 nozzles
Cover plate, stainless steel 1020 x 820 x 2 mm
3x flexible connection hose 1/2" - female thread
4x M 10 heavy-duty bolt
Pre-fitted, stainless steel enclosure 990 x 790 x 128 mm
2 light gaps, electronic ballast, T 5 fluorescent tubes, 39 watts - light colour 830
2 hinges and safety chains
Technical data
Minimum flow rate: 35 l/min (all three rain modes together)
Flow at 3 bar flow pressure in conjunction with xTool: 43 l/min
Minimum flow pressure: 2 bar
Max. flow pressure: 4 bar
Weight: 50 kg
Electricity supply: 220-240 V AC/DC, OHz, 50-60 Hz, 88 W
System of protection: IP 65
Planning information
Plumbing
Recommended water hardness: 6-7 °dH -
if the water is harder, integrate a water softener that uses the ion exchange principle into the feed pipe.
For the optimum choice of hot water storage device -
taking into consideration additional drawing-off points and
the frequency with which RainSky M is used - the specific
demand needs to be assessed.
Recommendation: storage capacity of at least 500 l.
For choosing the drainage, taking into consideration the
discharge of all the products in the shower, the specific
demand needs to be assessed.
Recommendation: Floor drain (connected rating) = 1.5 l/sec, drainage rate DN 70
Feed pipe (hot/cold): 2 x DN 20
The manual control by xTool with three valves and an out
for additional valves (for hand shower) needs to be ordered
separately (35 546 970 90 or 35 548 970 90).
Electrical
Earth-leakage circuit-breaker 30 mA provided
Feeder 3 x 1.5 mm2 NYM
Equipotential bonding 1 x 4 mm2
Customer must provide a light switch outside the shower
area (outside safety zone 2 under DIN VDE 0100, Part 701)